The Ultimate Guide to Air Suspension Spacers for Lifted Trucks

A truck’s advertised lift height is not a spacer size. Check the air spring kit’s fitment first, then confirm the measurements and mount style that its manufacturer uses.

Shopping for a Kit for Your Lifted Truck?

Start with your truck make, then check the exact kit's model-year, drivetrain and suspension exclusions. Confirm spacer requirements using that kit's instructions; do not select a spacer from the advertised lift height alone.

Ford kits · RAM/Dodge kits · Chevrolet kits · GMC kits · Toyota kits · Nissan kits

Why advertised lift height can be misleading

A lift can change front and rear heights by different amounts. Bracket locations, axle versus leaf mounting, and suspension travel also affect what works. A spacer cannot turn an otherwise incompatible kit into a compatible one.

What to record before ordering

  1. Identify the exact kit SKU, the truck year, model and drivetrain, and the rear lift components installed.
  2. Check the manual for the required mounting surfaces and the point at which the manufacturer wants measurements taken. Measure only from a safely accessible position, with the truck positioned as the manual directs.
  3. Record the actual distance and take photos of both bracket locations. Verify spacer height, bolt pattern, hardware and clearance using the kit maker’s chart or support guidance.

Can I use another brand’s spacer chart?

Only if that chart explicitly applies to your exact kit. For example, Firestone’s Ride-Rite spacer guide distinguishes axle-mounted from leaf-mounted applications. Its dimensions and part numbers are not a RETRUE compatibility chart.

Before installation

Do not stack or substitute spacers without the kit manufacturer’s approval. If measurement, travel or clearance is uncertain, send the kit SKU, photos and measured spacing to support or ask an installer to verify the setup.

Related guides

RELATED ARTICLES